Sanitizer Buckets and Test Strips: Doing It Right

Quick answer: Match your test strips to your sanitizer (chlorine strips for chlorine, quat strips for quat), mix to the label, dip a strip for the time the container specifies, compare to the color chart, and adjust. Retest during the shift and replace the solution when it tests weak or gets dirty.

Key takeaways

  • Strips must match the sanitizer type.
  • Mix to the label, then test.
  • Retest during the shift; dirty water weakens sanitizer.
  • Log results for inspections.

How to test

  1. Mix sanitizer with water exactly as the label directs.
  2. Dip the correct strip for the time on the container.
  3. Compare to the color chart immediately.
  4. Adjust: add sanitizer if weak, add water if too strong.
  5. Log the reading and time.

Chlorine vs. quat

Chlorine Quaternary ammonium (quat)
Strip type Chlorine strips Quat strips
Affected by Temperature, pH, food soil Water hardness, food soil
Strength Per label and local code Per label and local code

The National Environmental Health Association explains that chlorine's effectiveness depends on concentration, water temperature and pH; for example, lower concentrations need warmer water. Quats should be used at the concentration on the label.

When to change the bucket

  • Tests below the required range
  • Looks cloudy or dirty
  • At the frequency your local code requires

Most local codes follow the FDA Food Code, so inspectors will check strength. See our health inspection checklist and cleaning supplies checklist.

Clean bar, branded cup

Affogato Bean doesn't sell chemicals, but we keep branded cups, lids and napkins stocked on schedule. Talk to us.

Follow product labels and your local health code.

Frequently asked questions

What test strips do I need for café sanitizer?

Use strips made for your sanitizer type: chlorine strips for bleach-based sanitizer and quaternary ammonium (quat) strips for quat sanitizer. They aren't interchangeable.

How often should sanitizer buckets be tested and changed?

Test when you mix and periodically through the shift, and change the solution when it tests weak or looks dirty. Follow your local code and the product label.

What concentration should chlorine sanitizer be?

It depends on temperature and pH. The National Environmental Health Association notes that 50–99 ppm requires warmer water, while about 100 ppm works at lower temperatures. Follow the label and local code.

Sources

  1. National Environmental Health Association, “Sanitization for Food Safety: Using Sanitizer Test Strips.”
  2. U.S. Food and Drug Administration, “FDA Food Code 2022.”

Sources checked October 2026. Statistics are reported as published by each source.

Previous
Previous

Stickers, Pins, and Small-Ticket Merch

Next
Next

Barista Aprons: Materials, Branding, and Durability